Versatile Single-Chip Sensor for Ion Detection in Fluids
November 26, 2015 | ImecEstimated reading time: 3 minutes
Imec and Holst Centre (set-up by imec and TNO) have demonstrated a prototype of a single-chip electrochemical sensor for simultaneous detection of multiple ions in fluids. The demonstrator paves the way to small-sized and low-cost detection systems for agriculture, healthcare and lifestyle applications, food quality monitoring and water management.
Imec and Holst Centre’s ion sensor solution is a generic platform that can be tailored towards specific applications. It enables efficient and low-cost monitoring, such as monitoring of nutrient concentrations in surface and waste water, both for agricultural applications and water quality. In the healthcare and lifestyle applications, it provides disposable point-of-care solutions, or conformable solutions for integration into patches. Depending on the application and the form factor, it can be mass produced through microfabrication or through screen-printing on inexpensive substrates such as glass or foil. As compared to commercial ion sensors, this bring a unique advantage in terms of low cost manufacturability, and size of the solution. Moreover, by changing the selective membranes on the electrodes, the sensor can be adopted to detect other ions.
The presented prototype is a handheld device that integrates a single-chip sensor with different electrodes that detect pH levels in a range from 2 to 10 at a 0.1 pH accuracy. For the chemical elements chloride (Cl-), sodium (Na+), potassium (K+), and nitrate (〖NO〗_3^-) -ranging from 10-4 M to 1 M ions- the sensor detects at a 10 percent accuracy. Benchmarked against other available single-ion sensors, imec’s prototype demonstrated comparable sensitivity and accuracy for a versatile multiple-ion solution.
“With small autonomous smart sensors that adapt to and wirelessly communicate with the environment and each other, imec aims to develop the building blocks that enable an Intuitive Internet of Things,” stated Kathleen Phillips, program director perceptive systems at imec. “Our scientists and engineers have reached an important breakthrough demonstrating the capabilities of our technology with this versatile single-chip sensor. As we continue to improve our sensor platform, develop sensors for other ions, integrate more sensors into a single system, and extend the lifetime of our sensor, imec will be at the nucleus in driving the advancements of smart connected systems. We invite industry to join our R&D program, become a partner to jointly develop new ion sensing applications and to bring this technology to the market.”
About Holst Centre
Holst Centre is an independent R&D center that develops technologies for wireless autonomous sensor technologies and for flexible electronics, in an open innovation setting and in dedicated research trajectories. A key feature of Holst Centre is its partnership model with industry and academia based around shared roadmaps and programs. It is this kind of cross-fertilization that enables Holst Centre to tune its scientific strategy to industrial needs.
Holst Centre was set up in 2005 by imec (Flanders, Belgium) and TNO (The Netherlands) and is supported by local, regional and national governments. It is named after Gilles Holst, a Dutch pioneer in Research and Development and first director of Philips Research.
Located on High Tech Campus Eindhoven, Holst Centre benefits from, and contributes to, the state-of-the-art on-site facilities. Holst Centre has over 200 employees from some 28 nations and a commitment from over 40 industrial partners. For more information please visit www.holstcentre.com.
About imec
Imec performs world-leading research in nanoelectronics. Imec leverages its scientific knowledge with the innovative power of its global partnerships in ICT, healthcare and energy. Imec delivers industry-relevant technology solutions. In a unique high-tech environment, its international top talent is committed to providing the building blocks for a better life in a sustainable society. Imec is headquartered in Leuven, Belgium, and has offices in Belgium, the Netherlands, Taiwan, USA, China, India and Japan.
Suggested Items
Würth Elektronik Presents LEDs with Integrated Controllers
03/27/2024 | Würth ElektronikWürth Elektronik now offers WL-ICLED, a new series of RGB LEDs with integrated controller (IC). The components, controllable as pixels, combine a red, green and blue LED with a programmable contoller IC.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Mycronic to Showcase More Versatile, High-productivity Assembly Solutions at IPC APEX EXPO 2024
03/27/2024 | MycronicMycronic, the leading Sweden-based electronics assembly solutions provider, will continue to respond to growing customer demand for high-flexibility, high-productivity solutions for zero-defect PCB assembly at IPC APEX EXPO 2024 in Anaheim, CA on April 9 - 11.
Don Dennison Appointed to Roll Out KIC’s Latest Thermal Analysis System Software in the Northeast
03/26/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, is pleased to announce the appointment of PIT Equipment Services, LLC, led by Don Dennison, as its representative for New York, New Jersey, and Eastern Pennsylvania.
AT&S Well Prepared to Benefit from AI Boom
03/26/2024 | AT&SThe rapid progress in the development of artificial intelligence promises to revolutionize all areas of daily life in the coming years. In order to operate such AI systems, an enormous amount of computing power is required, which is provided by a vast network of data centres.