Perfecting a Gaseous Air Sensor
December 15, 2015 | CORDISEstimated reading time: 3 minutes
Prof. Andreas Schütze of the Laboratory for Measurement Technology (LMT) at Saarland University (Germany) coordinates the EU-funded project SENSINDOOR (Nanotechnology based intelligent multi-SENsor System with selective pre-concentration for Indoor air quality control), which runs from January 2014 to December 2016.
Its aim is to develop intelligent sensor systems based on nanotechnology to selectively monitor volatile organic compounds (VOCs) for demand-controlled ventilation in indoor environments. Here Prof. Schütze discusses the achievements and potential of the project to date.
What is the potential impact of the sensor technology being developed in SENSINDOOR?
The energy consumption for heating, ventilation and air conditioning (HVAC) of buildings is estimated to amount to almost 50 % of the overall primary energy consumption in industrialised countries. A large reduction of this energy consumption can be achieved by improved insulation and reduced air exchange. However, this will increase the concentration of the likes of formaldehyde, benzene and naphthalene in buildings, which are emitted by indoor sources (furniture, carpets, paint etc.). As we spend over 80 % of our time indoors this has a huge impact on our health, as it contributes to acute respiratory illnesses as well as increased cancer rates. With demand-controlled ventilation we can reduce the VOC concentration and thus ensure a healthier indoor environment.
What have been the main achievements of SENSINDOOR so far?
Achievements have been made on three levels in our project: at the technology level, we have developed Pulsed Laser Deposition (PLD) technologies for gas-sensitive layers to be integrated on various microsensor platforms as well as technologies for the deposition of Metal Organic Framework (MOF) layers on micro hotplates for pre-concentrators; at the sensor element level, novel metal oxide semiconductor (MOS) (gas sensor) and Silicon Carbide (based gas-sensitive) Field Effect Transistor (SiC-FET) sensor elements with high sensitivity for hazardous VOCs have been developed as well as an integrated microsystem combining sensor and pre-concentrator in a compact package; finally, at the systems level, we combined the sensor elements and pre-concentrator with dedicated electronics for dynamic operation and read-out with advanced data evaluation algorithms for very high sensitivity and selectivity.
Page 1 of 2
Suggested Items
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Intel Announces New Program for AI PC Software Developers and Hardware Vendors
03/27/2024 | Intel CorporationIntel Corporation announced the creation of two new artificial intelligence (AI) initiatives as part of the AI PC Acceleration Program: the AI PC Developer Program and the addition of independent hardware vendors to the program.
SEMI ESD Alliance 2024 CEO Executive Outlook to Explore the Evolving RISC-V Movement and Semiconductor Design Ecosystem
03/27/2024 | SEMIKey executives from leading semiconductor EDA and IP companies will gather to discuss the latest industry trends, challenges and opportunities Thursday, May 9, in Santa Clara, California at the annual CEO Executive Outlook, hosted by the Electronic System Design Alliance (ESD Alliance), a SEMI Technology Community, and Keysight Technologies. Registration opens soon.
CentraTEQ to Showcase Wide Range of Vibration & Environmental Test Systems at Battery Tech Expo 24
03/26/2024 | CentraTEQEnvironmental and vibration test specialists CentraTEQ are excited to be exhibiting at the upcoming Battery Tech Expo, scheduled to take place at Silverstone on April 25, 2024.
SEMI 3D & Systems Summit To Spotlight Trends In Hybrid Bonding, Chiplet Design And Environmental Sustainability
03/26/2024 | SEMILeading experts in 3D integration and systems for semiconductor manufacturing applications will gather at the annual SEMI 3D & Systems Summit, 12-14 June, 2024,