CWRU Researchers Tailor Power Source for Wearable Electronics
December 17, 2015 | Case Western Reserve UniversityEstimated reading time: 2 minutes
Wearable power sources for wearable electronics are limited by the size of garments. With that in mind, researchers at Case Western Reserve University have developed flexible wire-shaped microsupercapacitors that can be woven into a jacket, shirt or dress.
By their design or by connecting the capacitors in series or parallel, the devices can be tailored to match the charge storage and delivery needs of electronics donned.
While there's been progress in development of those electronics--body cameras, smart glasses, sensors that monitor health, activity trackers and more--one challenge remaining is providing less obtrusive and cumbersome power sources.
"The area of clothing is fixed, so to generate the power density needed in a small area, we grew radially-aligned titanium oxide nanotubes on a titanium wire used as the main electrode," said Liming Dai, the Kent Hale Smith Professor of Macromolecular Science and Engineering. "By increasing the surface area of the electrode, you increase the capacitance."
Dai and Tao Chen, a postdoctoral fellow in molecular science and engineering at Case Western Reserve, published their research on the microsupercapacitor in the journal Energy Storage Materials this week. The study builds on earlier carbon-based supercapacitors.
A capacitor is cousin to the battery, but offers the advantage of charging and releasing energy much faster.
How it works
In this new supercapacitor, the modified titanium wire is coated with a solid electrolyte made of polyvinyl alcohol and phosphoric acid. The wire is then wrapped with either yarn or a sheet made of aligned carbon nanotubes, which serves as the second electrode. The titanium oxide nanotubes, which are semiconducting, separate the two active portions of the electrodes, preventing a short circuit.
In testing, capacitance--the capability to store charge--increased from 0.57 to 0.9 to 1.04 milliFarads per micrometer as the strands of carbon nanotube yarn were increased from 1 to 2 to 3.
When wrapped with a sheet of carbon nanotubes, which increases the effective area of electrode, the microsupercapactitor stored 1.84 milliFarads per micrometer. Energy density was 0.16 x 10-3 milliwatt-hours per cubic centimeter and power density .01 milliwatt per cubic centimeter.
Page 1 of 2
Suggested Items
Record Numbers of Exhibitors to Showcase Products and Services at EWPTE 2024
04/25/2024 | IPCWHMA/IPC announces that 215 exhibitors spanning over 50,000 nsf of exhibit space will introduce new product technologies, innovations and demonstrations of the electrical wire harness, wire, coil winding and cable processing industries’ newest advancements at Electrical Wire Processing Technology Expo (EWPTE) to be held at Baird Center May 14-16, 2024, in Milwaukee, Wis. This marks the largest number of exhibiting companies in the event’s history. More than 3,000 attendees are expected to attend this year’s event.
The Connection Between Wire Harness and Box Build
04/17/2024 | Nolan Johnson, I-Connect007Christina Rutherford is a technical lead and expert in materials engineering at Honeywell, where her specialty is the design, specification, and manufacture of cables and wire harnesses. Rutherford also sits on the committee for IPC/WHMA-A-620. In this conversation, we explore the changing dynamics in wire harnesses and how they relate to box build. Christina’s standards work allows her to draw insightful parallels between wire harness and box build.
DOCOMO, NTT, NEC and Fujitsu Develop Top-level Sub-terahertz 6G Device
04/12/2024 | JCN NewswireNTT DOCOMO, INC., NTT Corporation, NEC Corporation and Fujitsu Limited jointly announced today the development of a top-level (1) wireless device capable of ultra-high-speed 100 Gbps transmissions in the 100 GHz and 300 GHz sub-terahertz bands.
Quectel Introduces Versatile BG95-S5 NTN Satellite Communication Module
04/09/2024 | BUSINESS WIREEmbedded World - Quectel Wireless Solutions, a global IoT solutions provider, today announces the launch of the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module. The module supports 3GPP Release 17 IoT-NTN in the S and L band frequencies for satellite communications. In addition, the multi-mode BG95-S5 supports LTE Cat M1, Cat NB2, eGPRS and integrated GNSS.
Semtech Pioneers the Path to 6G with Advanced 5G Wireless Technologies
03/27/2024 | BUSINESS WIRESemtech Corporation, a leader in high-performance semiconductors, IoT systems and cloud connectivity services, unveiled its latest innovations poised to shape the future of 5G and pave the way for 6G.