An Opportunity to Increase Power Devices Performance
January 8, 2016 | Yole DéveloppementEstimated reading time: 3 minutes
OUTLINES:
- SiC, GaN and other Wide Band GaP (WBG) materials represent new choices for power electronics applications.
- SiC n-type wafers will increase to US$ 110 million by 2020 with a 21% CAGR.
- Many players are competing on the GaN-on-Si epiwafer open market. What will happen?
- Not only is there GaN-on-Si, but also GaN-on-GaN. What's the status of bulk GaN wafer production?
When people think about Wide Band Gap (WBG) materials for power electronics applications, they usually think of GaN or SiC. This is a not a surprise: indeed SiC and GaN are currently the most advanced WBG technologies for power electronics applications. However, there are materials with an even larger band gap which can further increase power device performance. What is the development status of such innovative technologies? Are there already some products available on the market? What is the added-value of such materials?
Yole Développement (Yole) proposes a comprehensive overview of the whole WBG solutions dedicated to the power electronics industry. This survey is entitled SiC, GaN and other WBG materials for power electronics applications. Including a detailed analysis of the most advanced WBG materials, SiC and GaN, Yole’s report also highlights the added-value of disruptive technologies such as Ga2O3, diamond and AlN. Yole’s analysts detail the status of such new solutions and the related technology roadmap. The “More than Moore” market research and strategy consulting company also presents the technical and market challenges facing WBG players.
As the Si technology is reaching the theoretical limits, new semiconductor materials called wide band gap (WBG) is becoming the new choice for power electronics applications. Different WBG materials are SiC, GaN, Ga2O3, Diamond and AlN. The development status of these WBG materials varies from one to other. Indeed SiC and GaN-on-Si based power devices are commercially available today; the development of GaN-on-GaN power devices is ongoing; Ga2O3, diamond and AlN power devices are just at a primitive stage.
Page 1 of 2
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).