Polymer Power Potential
February 5, 2019 | A*STAREstimated reading time: 2 minutes
The mantra ‘reduce, reuse, recycle’ is increasingly pertinent. Every year, vast amounts of energy that could be captured and reused is lost through waste heat. Now, A*STAR scientists have demonstrated, through theoretical calculations, that it may be possible to fabricate thermoelectric organic polymers that can convert heat into electrical energy with high efficiency.
Thermoelectric (TE) materials work by responding to temperature differences, inducing electric charge carriers to flow from the hot to the cold side of the material. TE materials are already used for powering refrigeration, and for limited power generation. An effective TE material needs to have high electrical conductivity, low thermal conductivity, and a high ‘Seebeck coefficient’—the voltage generated per degree of temperature difference across the material. However, it is rare for any one material to satisfy all of these conditions, meaning that existing TE materials are limited in efficiency.
“One way of improving TE performance is to use doping, adding certain chemicals to the material to enhance its electrical conductivity by increasing charge carrier concentrations,” says Shuo-Wang Yang, at A*STAR’s Institute of High Performance Computing, who led the team. “However, doping can also interfere with the materials’ stability and performance, and finding a dopant that works effectively is challenging. Identifying TE materials that work without doping could transform energy harvesting.”
The team focused their attention on linear-backbone coordination polymers, structures containing metal ions linked by ligands, which can be built in the laboratory to specific designs. These polymers exhibit numerous advantages over conventional inorganic TE materials; they are flexible, have low thermal conductivity and are compatible with biological organisms. However, they have low electrical conductivity—a challenge that Yang and co-workers tried to overcome in their theoretical search.
“Based on first-principle molecular dynamics and structure optimization, we identified a polymer called poly(nickel-ethylenetetrathiolate) and three associated analogs which demonstrate intrinsically metallic behaviors and high electrical conductivity,” says Yang. “This is exciting as it suggests these polymers are potential dopant-free TE materials.”
The team’s analyses suggest that this metallic behavior stems from the formation of dense, non-bonding molecular interactions between sulfur or selenium atoms within the polymeric structures. These interactions strengthen the forces between the atoms, decreasing electronic band gaps and encouraging the flow of electrical charge.
“Xu Jianwei, Kedar Hippalgaonkar, and their teams at the A*STAR Institute of Materials Research and Engineering are now synthesizing these polymers,” says Yang. “These materials are very promising, particularly in the applications of waste heat recovery and refrigeration near ambient temperature.”
Suggested Items
Material Insight: The Dielectric Constant of PCB Materials
05/17/2024 | Dr. Preeya Kuray -- Column: Material InsightIn the world of PCB design, miniaturization can be achieved by using low dielectric constant (Dk) materials. Low Dk materials can allow for a reduction in thickness while maintaining a given trace width, leading to lower transmission loss and higher density circuitry.
IPC APEX EXPO: Some Thoughts About Growth
05/16/2024 | Dan Feinberg, I-Connect007After two and a half days of wandering the aisles at IPC APEX EXPO 2024, for the first time, I almost felt like I was exploring CES. There were so many booths and exhibits that I could describe, but I’d like to focus on the growth and huge value of this event, which has expanded well beyond just the growing and impressive exhibit show floor.
The Shaughnessy Report: Unlock Your High-speed Material Constraints
05/15/2024 | Andy Shaughnessy -- Column: The Shaughnessy ReportThe world of PCB materials used to be a fairly simple one. It was divided into two groups: the “traditional” laminates, often called FR-4, and the high-speed laminates developed especially for high-speed PCBs. These were two worlds that usually didn’t collide. But then traditional laminates started getting better, and high-speed designers and design engineers took notice and started to reconsider what FR-4 could be used for.
Breaking High-speed Material Constraints: Design007 Magazine — May 2024
05/14/2024 | I-Connect007 Editorial TeamDo you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems instead of high-speed materials, saving time and money while streamlining the fab process. In the May 2024 issue of Design007 Magazine, our contributors explain how to avoid overconstraining your materials when working with high-speed boards.
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.