NEC Develops RAN Autonomous Optimization Technology that Dynamically Controls 5G Networks Based on User Terminal Status
February 16, 2024 | JCN NewswireEstimated reading time: 2 minutes
NEC Corporation has developed a RAN autonomous optimization technology that dynamically controls 5G Radio Access Networks (RAN) according to the status of each user terminal, dramatically improving the productivity of applications, such as the remote control of robots and vehicles. NEC will incorporate the technology into RAN Intelligent Controllers (RIC) and conduct demonstration tests using this technology by March 2025.
Background
There is growing momentum to promote digital transformation (DX) by utilizing the latest technologies such as 5G, Artificial Intelligence (AI), and the Internet of Things (IoT) with the aim of resolving labor shortages and improving productivity. When using these technologies for remote control of robots and vehicles, two-way communication consisting of status monitoring and control instructions for each robot/vehicle must be completed within a certain period of time. However, if the communication latency exceeds the requirement, the operation is repeatedly suspended for safety reasons, resulting in a decrease in the operation rate and productivity. The communication delays, such as retransmission delays due to poor radio quality and queuing delays* due to congestion on the radio links, have been a barrier to the introduction of remote control systems. Currently, stable communications environments have been achieved by installing high performance network equipment, providing sufficient frequency resources, increasing redundancy in coding and communication paths, and pre-configuration of RAN parameters according to the application. However, with these methods, it is difficult to widely support applications that are diversifying with the advancement of DX, and the time and cost required for implementation is also an issue.
About the RAN autonomous optimization technology
The RAN autonomous optimization technology developed by NEC consists of AI that analyzes communication requirements and radio quality fluctuations on a per-user terminal basis, such as robots and vehicles, and AI that dynamically controls RAN parameters on a per-user terminal basis based on the results of that analysis. This AI learns from past operational records of robots and vehicles, and optimally controls RAN parameters such as modulation and coding scheme (target block error rate), radio resource allocation (resource block ratio), and maximum allowable delay (delay budget) while predicting the probability of exceeding communication latency requirements. Whereas in a typical 5G network, RAN parameters are fixed and set for the entire network, this technology dynamically controls them on a per-user terminal basis to improve application productivity.Technology features are as follows.
1. Flexible support for a variety of applications
RAN parameters can be dynamically controlled according to the communication requirements of applications, enabling overall optimization even in environments where diverse applications are mixed.
2. O-RAN Alliance-compliant and easy to deploy
Since it can be mounted on RIC that are compliant with O-RAN Alliance standard specifications, it is easy to install or add to existing facilities.
3. Dramatic productivity gains are possible at industrial sites
Simulation results of applying this technology to a system that remotely controls multiple autonomous robots operating in factories or warehouses confirmed that the number of robot stoppages can be reduced by 98% or more compared to cases where this technology is not used.
Future Developments
NEC plans to incorporate the technology into RIC platforms compliant with the O-RAN Alliance standard specifications and conduct demonstration tests using this technology by March 2025.NEC will exhibit this technology at MWC Barcelona 2024, the world's largest mobile exhibition, which will be held from February 26 to February 29, 2024 at Fira Gran Via, Barcelona, Spain
Suggested Items
Real Time with… IPC APEX EXPO 2024: Digitization and Regular Updates of the iNEMI Industry Roadmap
05/14/2024 | Real Time with...IPC APEX EXPORanjan Chatterjee is a board member at iNEMI. In this conversation with Editor Nolan Johnson, Chatterjee discusses the digitization of, and regular updates to, the industry roadmap. The roadmap is a collaborative effort on technologies and standards which is intended to guide CEOs and CTOs in their long-range planning. Ranjan discusses the board's role in shaping the roadmap and the vision for more frequent updates.
IDC: Indian Smartphone Market Grew by 11% YoY in 1Q24 to 34 Million Units
05/14/2024 | IDCAccording to the International Data Corporation ’s (IDC) Worldwide Quarterly Mobile Phone Tracker, India’s smartphone market shipped 34 million smartphones in 1Q24, with 11.5% growth YoY (year-over-year), making it the third consecutive quarter of growth in shipments.
MBDA: Successful Qualification Firing of GRIFO System with CAMM-ER Missile
05/13/2024 | MBDAMBDA has recently performed a successful qualification firing of the GRIFO system, the Italian Army’s new generation air defence system, a member of the EMADS (Enhanced Modular Air Defence Solutions) family developed by MBDA, based on the CAMM-ER (Common Anti-Air Modular Missile – Extended Range) missile.
Wistron Posts Q1 2024 Financial Results
05/13/2024 | WistronFollowing the meeting of the Board of Directors of Wistron Corp., the company announced the financial results for the first quarter ended March 31, 2024.
New Appointment Strengthens Ventec’s Value-Added Equipment Division
04/29/2024 | VentecVentec announces the appointment of Leigh Allinson as Commercial Director for its value-added PCB Equipment division 'Ventec Giga Solutions'.