ACE to Exhibit New Innovative Soldering Technologies at IPC APEX EXPO 2016
February 24, 2016 | ACE Production Technologies Inc.Estimated reading time: 1 minute
ACE Production Technologies Inc., a supplier of selective soldering systems, lead tinning systems and lead tinning services, will exhibit new innovative soldering technologies in Booth 2022 at the IPC APEX Expo, scheduled to take place March 15-17, 2016 at the Las Vegas Convention Center in Las Vegas, Nevada.
A complete range of standalone selective soldering systems including the popular KISS-102 and in-line systems such as the KISS-101IL, KISS-103IL and dual pot KISS-103ILDP will be on display. All systems are equipped with graphics-based software and include automatic fiducial correction and board warp compensation as standard features at no additional cost.
Premiering at APEX, is the LTS300-JEDEC which is the most technologically advanced molten solder lead tinning system on the market consisting of two dynamic nitrogen inerted solder pots, a dynamic flat wave fluxing station, forced convection preheating, aqueous wash and drying stations, plus a JEDEC tray stacker forming a complete component re-tinning work cell.
At the heart of the new LTS300-JEDEC is a fully integrated vision system consisting of top and bottom viewing cameras for accurate alignment of electronic components prior to re-tinning to ensure complete control over fine-pitch components during immersion and extraction of the hot solder dip process. The vision system also performs post-tinning inspection to detect potential solder bridges before placing components back into a JEDEC tray. The LTS300-JEDEC is a fully-configured system capable of performing a molten solder component lead tinning process for gold removal and re-tinning of components for Class 2 and Class 3 applications in compliance with the new J-STD-001, Rev F requirements.
Also on display will be the revolutionary STS-202 dip and look solderability test system. The new ACE solderability tester is capable of performing solderability testing to determine the solderability of component leads and terminations prior to being joined in a soldering operation. The system utilizes the proven dip and look test method in conformance with all IPC, ANSI and MIL standards including J-STD-002, MIL-STD-883 Method 2003 and MIL-STD-202 Method 208.
Suggested Items
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.