Optomec Showcases Mass Production 3D Printing Technology at Printed Electronics USA Conference
November 16, 2016 | OptomecEstimated reading time: 2 minutes
Optomec announced today that the company will showcase its solutions at the IDTechEx conference held November 16-17th at the Santa Clara Convention Center in Santa Clara, CA. Optomec will be in booth #F09.
Optomec will highlight its Aerosol Jet 3D printing systems used for a wide array of printed electronics applications from R&D to high volume manufacturing. Examples of printed electronic devices will be on display in the Optomec booth along with a live demonstration of the Aerosol Jet 200 system for printed electronics, and a video showing Aerosol Jet systems in use at LITE-ON MOBILE printing millions of consumer electronic devices. Additionally, Optomec will highlight fully printed and repaired 3D metal components produced by the company’s LENS customers that illustrate a range of 3D metal additive manufacturing capabilities.
Dr. Mike Renn, Optomec CTO, will deliver a presentation at the conference titled “Micron Scale Printing of 3D Printed Structures” at 5:10 pm on Wednesday, November 16. In his talk, Dr. Renn will explain how Aerosol Jet technology can enable 3D polymer and composite structures to be printed at the micron scale with embedded electronics. This breakthrough has significant potential to reduce the cost and size of next-generation products used in the electronics and bio-medical industries. This new capability is enabled by combining Optomec’s production-proven Aerosol Jet solution for fine feature printing with a proprietary in-situ curing capability for rapid on-the-fly solidification. Unlike other high resolution 3D printing approaches that deposit material globally (i.e., in a powder bed, and then cure locally to define a pattern), the Optomec method relies on both local deposition and local curing. This makes the process more economical, in terms of material consumption, and is also key to enabling the highest resolution features available.
Aerosol Jet 3D micro-structure printing is capable of ultra-high resolutions with lateral features sizes down to 10 microns, and lateral and vertical build resolutions from 1 micron to 100 nanometers, respectively. Aspect ratios of more than 100:1 have been achieved. Additionally, such 3D micro-structures can be printed onto existing components and products, such as semiconductor chips, medical devices or industrial parts. Click here to access a white paper on Aerosol Jet 3D micro-structure printing.
Dr. Himanshu Sahasrabudhe, LENS Senior Applications Engineer, will give a presentation titled “Powdered Metals – What To Expect When You Build Metal Additively” at 11:40 am on Thursday, November 17. Dr. Sahasrabudhe will discuss what to expect when using additive manufacturing technology to build, repair and coat metal components. His presentation will discuss different processes used to build parts additively from powdered metals, the types of materials available, what properties to expect, and application areas where metal additive manufacturing is used in production today.
About Optomec
Optomec is a privately held, rapidly growing supplier of Additive Manufacturing systems. Optomec’s patented Aerosol Jet Systems for printed electronics and LENS 3D Printers for metal components are used by industry to reduce product cost and improve performance. Together, these unique printing solutions work with the broadest spectrum of functional materials, ranging from electronic inks to structural metals and even biological matter. Optomec has more than 200 marquee customers around the world, targeting production applications in the Electronics, Energy, Life Sciences and Aerospace industries.
Suggested Items
IMI Taps New Opportunities to Sustain Grit in China
03/28/2024 | IMIIntegrated Micro-Electronics, Inc. (IMI), Joey S. Bantatua, IMI China’s head of operations and general manager was recently interviewed by Asia Electronics Industry (AEI) magazine where he talked about the prospects of the country both as a market and a production hub.
Kimball Electronics Publishes Annual Sustainability Disclosures with its 2023 Guiding Principles Report
03/28/2024 | BUSINESS WIREKimball Electronics, Inc. published its annual sustainability disclosures in its 2023 Guiding Principles Report, themed “How We Are Winning Together The Kimball Way.”
iNEMI Webinar: Humidity Robustness and Insulation Coordination for e-Mobility
03/27/2024 | iNEMIThis webinar is a follow-up to the recent Seminar on Humidity Robustness and Insulation Coordination for e-Mobility, organized by iNEMI and ZESTRON Europe and supported by the ECPE.
Electronics Industry Sentiment Rises in March
03/27/2024 | IPCIPC releases March 2024 Global Sentiment of the Electronics Supply Chain Report
Mycronic to Showcase More Versatile, High-productivity Assembly Solutions at IPC APEX EXPO 2024
03/27/2024 | MycronicMycronic, the leading Sweden-based electronics assembly solutions provider, will continue to respond to growing customer demand for high-flexibility, high-productivity solutions for zero-defect PCB assembly at IPC APEX EXPO 2024 in Anaheim, CA on April 9 - 11.