Megasonic Acoustic Surface Treatment Process for Enhanced Copper Electrodeposition in Via Interconnects
July 4, 2017 | Thomas Jones, Dr. David Flynn, Marc P.Y. Desmulliez and Dennis PriceEstimated reading time: 1 minute
Introduction
A printed circuit board is populated with a multitude of electro-mechanical components plus various active and passive devices such as transistors, capacitors, inductors and resistors, which enable the functionality and assembly of the PCB. Increasing the density of the components on the surface of a board enables greater functionality and use. A high-density (HD) design is desirable for technology high end applications, which include automotive, aerospace, space, defense, mobile phones, medical, networking, communications, and computer storage[1].
The current trend in PCB markets is lowtechnology, high-volume demand and is typically supplied by low-cost, large-scale facilities in Southeast Asia, such as China, India and Thailand. High-value, low-volume PCB markets are typically supplied by smaller-sized facilities in western regions such as North America and Europe, but also economically developed east
ern locations such as Japan, South Korea and Taiwan[2]. The UK PCB demand typically focuses on this latter market. Manufacturing developments bringing increased capability and cost savings to a factory in the UK would be highly desirable and enable increased market competitiveness. For more than four years, Merlin Circuit Technology Ltd (MCT), in Deeside, North Wales, has been working in collaboration with Heriot-Watt University (HWU) in Edinburgh, Scotland, on a UK government project funded by the Engineering and Physical Sciences Research Council (EPSRC), looking to improve HD PCB manufacturing capability through enhancements to the electrodeposition of copper using high frequency acoustic, applied within a copper plating bath [3,4,5]. This article outlines some of the key findings from this project.
To read the full version of this article which appeared in the June 2017 issue of The PCB Magazine.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.