Equipment/Process Selection: Case Study of a DMADV Approach to PCB FAB Process Design
February 5, 2018 | Alex Stepinski, WHELEN ENGINEERINGEstimated reading time: 1 minute
Background
In 2014, Whelen Engineering Company, the OEM market leader in the emergency warning industry, developed the world’s first green smart PCB fab factory as a captive operation servicing internal demand. Due to the success of this venture, in 2016, a decision was made to explore building an upgraded factory which would serve the merchant market. This article outlines the approach we took to designing this new phase of our commercial existence, which has now been spun off as a separate business unit known as Greensource Fabrication. This new business unit is expected to go live in 2018.
Summary Approach
In our experience, a holistic DMADV approach to complex process design is not commonly used in the PCB industry. This approach requires a commitment to dedicated R&D re-sources, extensive travel by the technical team, a great deal of hands-on experience, as well as significant investment capital. Since very few PCB fabs perform R&D, we believe that there is a currently a very high ROI to this approach with low risk, since it is easy to design and secure strong competitive advantages when everyone else is just copying each other.
To read the full version of this article which appeared in the January 2018 issue of The PCB007 Magazine, click here.
Suggested Items
SMTA’s Conducts First UHDI Symposium
03/29/2024 | Marcy LaRont, PCB007 MagazineSMTA’s first UHDI Symposium in Peoria, Arizona, on Tuesday, March 26 featured a standout full-day technical program with 11 separate presentations on what will be required for our companies to move to ultra HDI manufacturing. The event was the brainchild of Tara Dunn, SMTA director of training and education. It included a compelling and collaborative presentation by David Haboud of Altium, John Johnson of American Standards Circuits, and Chrys Shea of Shea Engineering, who had spent the past several weeks creating and building an appropriate SMT test board vehicle for UHDI, something that was passed around for all conference goers to see and touch.
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.