Agfa: Staying Ahead of the Technology Curve
August 1, 2018 | Barry Matties, I-Connect007Estimated reading time: 5 minutes
In the ultracompetitive electronics manufacturing space, companies that don’t continually evolve and invest in new technologies run the risk of being left behind. At the recent EIPC summer conference, many next-generation processes and technologies were discussed and even put on display. Publisher Barry Matties spoke with Agfa’s newly appointed Global Sales Manager, Mariana Van Dam, to talk about how her company, typically known for its phototooling products, continues to evolve by developing inkjet printing, solder mask and additive technologies.
Matties: Mariana, please give a brief intro of yourself and Agfa for our readers.
Van Dam: I’ve been with Agfa for two-and-a-half years. I started as New Business Development and Product Manager and have moved on to the position of Global Sales Manager since October 2017. Prior to Agfa, I have worked in different positions related to products for the printed circuit board industry.
Agfa is known in the PCB industry for phototooling, which we have been doing for many years; it is an important product for us still, but some years ago we started with the development of a digital solution. We are now developing functional inks for inkjet printing. We have UV inkjet legend inks, etch resist and we are very far advanced with the solder mask.
Matties: The solder mask is the exciting news.
Van Dam: Yes, that's the one that is getting very high interest from the market. We are excited about it and really have great confidence that this will become a success.
Matties: When we last talked you were well into the process, but I think just starting into the beta site of things.
Van Dam: Yes. Now we believe that the product is “as good as” ready. We are still doing beta site testing, but our product meets all the IPC standards and the additional automotive standards. But solder mask is a complex product and we feel we must test it thoroughly. Because we need the feedback from the customers, there may be requirements we haven't tested yet that we have to look at, so that is ongoing. We have sites in Europe and the U.S.
Matties: Are the equipment manufacturers also in cooperation in the process?
Van Dam: Yes, we work with the different equipment manufacturers that produce inkjet equipment for solder mask. So it's always a three-way with the customer, the equipment manufacturer and Agfa. We have to work together, because the equipment side and the printing strategy are very important. It's not only the ink, it really goes together.
Matties: The benefits from applying with the jets are both to process reductions and the accuracy, especially as we move into a world of HDI. What sort of feedback are you getting from your beta sites?
Van Dam: Right now, it's quite sufficient for the requirement of most PCB companies. Inkjet equipment is also evolving and there are printheads available now with very small nozzle sizes. Because of this evolution it is possible to obtain really fine features.
Matties: How do you overcome the speed issue?
Van Dam: That's more from the equipment side; you can increase the speed by adding more printheads.
Matties: So it’s just a function of the number of pieces of equipment that you have in there.
Van Dam: Yes. You see this with the legend ink inkjet that is now an accepted production method. Initially this was a smaller machine with one head or two printheads; today there are machines for mass production. In China you see equipment with eight printheads. They're being installed now.
Matties: Ultimately, you would like to see the big shots in China adopting this technology because there are so many benefits. But the speed answer must be there in an economical way.
Van Dam: Yes. At the moment, the equipment is also in the final stage of development for the solder mask application. It's a new production method and I think initially it will be mainly the quick turnaround and prototype shops where we will start. But we have indeed seen a lot of interest for the mass production also. They already ask for it, so it will get there eventually for sure.
Matties: Orbotech was speaking earlier about some exciting equipment for solder mask coming out.
Van Dam: Yes, indeed, the equipment is not released yet, but they are really working on it and we also work together with them like we work together with the other manufacturers.
Matties: I remember in the past some equipment suppliers brought out equipment, but you could only use their inks, and I thought that was a mistake.
Van Dam: Yes, I think it must be decoupled because I think also that customers, certainly in mass production, want dual supply. If the product is so critical and so important you cannot rely on one supplier, you need to be able to have multiple options.
Page 1 of 2
Suggested Items
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.