A New Way to Measure Solar Panel Degradation
January 11, 2019 | AIP.orgEstimated reading time: 2 minutes
Despite many benefits and relative popularity as a renewable energy source, eventually, the sun does set on even the best solar panels. Over time, solar cells face damage from weather, temperature changes, soiling, and UV exposure. Solar cells also require inspections to maintain cell performance levels and reduce economic losses.
So, how does one inspect panels in real time, in a way that is both cost-effective and time-efficient? Parveen Bhola, a research scholar at India’s Thapar Institute of Engineering and Technology, and Saurabh Bhardwaj, an associate professor at the same institution, spent the last few years developing and improving statistical and machine learning-based alternatives to enable real-time inspection of solar panels. Their research found a new application for clustering-based computation, which uses past meteorological data to compute performance ratios and degradation rates. This method also allows for off-site inspection.
Clustering-based computation is advantageous for this problem because of its ability to speed up the inspection process, preventing further damage and hastening repairs, by using a performance ratio based on meteorological parameters that include temperature, pressure, wind speed, humidity, sunshine hours, solar power, and even the day of the year. The parameters are easily acquired and assessed, and can be measured from remote locations.
Improving PV cell inspection systems could help inspectors troubleshoot more efficiently and potentially forecast and control for future difficulties. Clustering-based computation is likely to shed light on new ways to manage solar energy systems, optimizing PV yields, and inspiring future technological advancements in the field.
“The majority of the techniques available calculate the degradation of PV (photovoltaic) systems by physical inspection on site. This process is time-consuming, costly, and cannot be used for the real-time analysis of degradation,” Bhola said. “The proposed model estimates the degradation in terms of performance ratio in real time.”
Bhola and Bhardwaj worked together before and developed the model to estimate solar radiation using a combination of the Hidden Markov Model and the Generalized Fuzzy Model.
The Hidden Markov Model is used to model randomly changing systems with unobserved, or hidden states; the Generalized Fuzzy Model attempts to use imprecise information in its modeling process. These models involve recognition, classification, clustering, and information retrieval, and are useful for adapting PV system inspection methods.
The benefits of real-time PV inspection go beyond time-sensitive and cost-efficient measures. This new, proposed method can also improve current solar power forecasting models. Bhola noted that the output power of a solar panel, or set of solar panels, could be forecasted with even greater accuracy. Real-time estimation and inspection also allows for real-time rapid response.
“As a result of real-time estimation, the preventative action can be taken instantly if the output is not per the expected value,” Bhola said. “This information is helpful to fine-tune the solar power forecasting models. So, the output power can be forecasted with increased accuracy.”
Suggested Items
Real Time with... IPC APEX EXPO 2024: AI Implementation at Omron
04/18/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Omron Product Manager Nick Fieldhouse discuss the company's focus on AI implementation to enhance customer experience and results. They address programming challenges and how AI can help customers achieve better outcomes with less experience. Omron's AI is compatible with existing systems, facilitating easy upgrades.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Australian Flow Batteries and The SCHMID Group Announce Groundbreaking Memorandum of Understanding
04/17/2024 | SCHMID GroupAustralian Flow Batteries Pty Ltd (AFB), a leader in innovative energy solutions and economical, safe, and reliable power storage, and SCHMID Energy Systems GmbH a company of the German SCHMID Group, a global technology leader with a rich history in delivering innovative solutions across multiple industries including Electronics, Renewables, and Energy Storage sectors, are thrilled to announce the signing of a Memorandum of Understanding (MoU)
Ansys Joins BAE Systems’ Mission Advantage Program to Advance Digital Engineering Across US Department of Defense
04/16/2024 | ANSYSAnsys announced it is working with BAE Systems, Inc., to accelerate the adoption of digital engineering and MBSE across the Department of Defense (DoD).
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.