Researchers Develop a New Self-Assembling Nanomaterial for Solar Power
January 29, 2019 | ASRCEstimated reading time: 3 minutes
Solar rays are a plentiful, clean source of energy that is becoming increasingly important as the world works to shift away from power sources that contribute to global warming. But current methods of harvesting solar charges are expensive and inefficient—with a theoretical efficiency limit of 33%.
Image Caption: In this illustration, DPP and rylene dye molecules come together to create a self-assembled superstructure. Electrons within the structure absorb and become excited by light photons, and then couple with neighboring electrons to share energy and create additional excited electrons that can be harvested to create solar cells.
New nanomaterials developed by researchers at the Advanced Science Research Center (ASRC) at The Graduate Center of The City University of New York (CUNY) could provide a pathway to more efficient and potentially affordable harvesting of solar energy.
The materials, created by scientists with the ASRC’s Nanoscience Initiative, use a process called singlet fission to produce and extend the life of harvestable light-generated electrons. The discovery is described in a newly published paper in the Journal of Physical Chemistry. Early research suggests these materials could create more usable charges and increase the theoretical efficiency of solar cells up to 44 percent.
“We modified some of the molecules in commonly used industrial dyes to create self-assembling materials that facilitate a greater yield of harvestable electrons and extend the electrons’ xcited-state lifetimes, giving us more time to collect them in a solar cell,” said Andrew Levine, lead author of the paper and a Ph.D. student at The Graduate Center.
The self-assembly process, Levine explained, causes the dye molecules to stack in a particular way. This stacking allows dyes that have absorbed solar photons to couple and share energy with —or “excite”—neighboring dyes. The electrons in these dyes then decouple so that they can be collected as harvestable solar energy.
Methodology and Findings
To develop the materials, researchers combined various versions of two frequently used industrial dyes—diketopyrrolopyrrole (DPP) and rylene. This resulted in the formation of six self-assembling superstructures, which scientists investigated using electron microscopy and advanced spectroscopy. They found that each combination had subtle differences in geometry that affected the dyes’ excited states, the occurrence of singlet fission, and the yield and lifetime of harvestable electrons.
Significance
“This work provides us with a library of nanomaterials that we can study for harvesting solar energy,” said Professor Adam Braunschweig, lead researcher on the study and an associate professor with the ASRC Nanoscience Initiative and the Chemistry Departments at Hunter College and The Graduate Center. “Our method for combining the dyes into functional materials using self-assembly means we can carefully tune their properties and increase the efficiency of the critical light-harvesting process.”
The materials’ ability to self-assemble could also shorten the time for creating commercially viable solar cells, said the researchers, and prove more affordable than current fabrication methods, which rely on the time-consuming process of molecular synthesis.
The research team’s next challenge is to develop a method of harvesting the solar charges created by their new nanomaterials. Currently, they are working to design a rylene molecule that can accept the electron from the DPP molecule after the singlet fission process. If successful, these materials would both initiate the singlet fission process and facilitate charge-transfer into a solar cell.
About the Advanced Science Research Center
The ASRC at The Graduate Center elevates scientific research and education at CUNY and beyond through initiatives in five distinctive, but increasingly interconnected disciplines: environmental sciences, nanoscience, neuroscience, photonics, and structural biology. The ASRC promotes a collaborative, interdisciplinary research culture with renowned researchers from each of the initiatives working side-by-side in the ASRC’s core facilities, sharing equipment that is among the most advanced available.
About The Graduate Center of The City University of New York
The Graduate Center of The City University of New York (CUNY) is a leader in public graduate education devoted to enhancing the public good through pioneering research, serious learning, and reasoned debate. The Graduate Center offers ambitious students more than 40 doctoral and master’s programs of the highest caliber, taught by top faculty from throughout CUNY — the nation’s largest public urban university. Through its nearly 40 centers, institutes, and initiatives, including its Advanced Science Research Center (ASRC), The Graduate Center influences public policy and discourse and shapes innovation. The Graduate Center’s extensive public programs make it a home for culture and conversation.
Suggested Items
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.