Flexible Circuit Design Guidelines
March 5, 2020 | Flexible Circuit TechnologiesEstimated reading time: 1 minute
Flexible circuit designs share many of the same challenges of rigid PCB designs, but there are also many differences and additional challenges. The very nature of a flex circuit being able to bend and flex make it as much a mechanical device as an electrical one. This creates a special set of requirements unique to flexible circuitry. Understanding how these requirements interact will allow the PCB designer to create a flex circuit that balances the electrical and mechanical features into a reliable, cost-effective interconnect solution.
Overview
Scrutinize your design for stress concentration features. Stress concentration features are the single predominant cause for mechanical failures in flexible circuits (i.e., cracked/broken conductors, torn insulating material, etc.). To avoid stress concentration points, the construction of the circuit should not change in, or immediately adjacent to, the bend area. In a bend area, there should be no change of conductor width or thickness or direction, no termination of plating or coatings, no openings in covers or outer insulating materials, and no holes of any kind in a bend zone.
Bend Ratio
Determine and evaluate the minimum bend ratio of your design. This will be your single best indicator of whether your flex circuit may experience problems in service. Bend ratio is bend radius: circuit thickness.
To read this entire article, which appeared in the January 2020 issue of Design007 Magazine, click here.
Suggested Items
Trackwise Awarded Prestigious King’s Award for Enterprise for Innovation
04/24/2024 | TrackwiseTrackwise Designs plc, the innovative manufacturer of specialist products using printed circuit technology, is delighted to be recognised with a prestigious King’s Award for Enterprise. Announced, Friday 21 April, Trackwise has been recognised for its excellence in Innovation for its length-unlimited, multilayer flexible printed circuits.
IDTechEx Discusses the Role of Printed Sensors in Mass-Digitization
04/11/2024 | PRNewswireIntegrated sensors digitizing physical interactions are vital in everyday life. From personalized user experiences to warehouse inventory management, data-driven insights are driving demand for smarter sensors — and lots of them.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
OE-A at LOPEC: Printed Electronics Powers Sustainability
02/06/2024 | OE-AThe “OE-A Competition 2024” shows the many possibilities of flexible, organic, and printed electronics with inspiring products, prototypes, and fresh designs live at LOPEC 2024, the leading international exhibition and conference for flexible, organic, and printed electronics in Munich.
All Flex Solutions Invests in New Flexible Circuit Facility
02/05/2024 | All Flex SolutionsAll Flex Solutions has started the equipment build-out of a completely new flexible circuit manufacturing facility in Minneapolis. The building was purchased in 2020, and was completely renovated to accommodate the company’s plans for a brand new state-of-the-art flexible circuit fabrication plant.