Maxim Integrated Unveils Data Acquisition System to Achieve ASIL-D Compliance


Reading time ( words)

Designers of automotive battery management systems (BMS) can now deliver the highest level of safety for voltage, current, temperature and communication while also saving space and reducing solution cost, with the MAX17852 14-channel, high-voltage, ASIL-D data-acquisition system from Maxim Integrated Products, Inc. Designed for integration within electric vehicles, hybrid electric vehicles and other transportation systems, the IC is ideal for smart junction box, 48V and other automotive battery systems which can see voltages up to 400V and beyond.  

OEMs and electric vehicle manufacturers require that all battery systems meet the highest safety requirements set by the ISO26262 guidelines. Through comprehensive diagnostics and a safety-driven architecture, Maxim Integrated designed and manufactured the MAX17852 to enable customers to design their systems to meet the highest ASIL-D standards for voltage, current, temperature and communication.

The small, cost effective IC also offers the highest accuracy for delivering voltage, current and temperature data with tight time synchronization. It allows a typical cell voltage measurement of ±0.45mV at room temperature and a maximum of ±2mV error in a temperature range of 5 degrees to 40 degrees Celsius, enabling car OEMs to get the most mileage range out of their batteries. With a current sense amplifier capability of +/-300mV, and a gain setting up to 256 times and 0.3 percent current sense gain error, the MAX17852 provides the fastest, most accurate data for calculating power management, state of health and state of charge. 

The 14-channel battery data acquisition system integrates a current sense amplifier so that current information is acquired at the same time as cell voltage and temperature. The MAX17852 allows both hall effect sensor and shunt resistors to be used as sensing components.

Share

Print


Suggested Items

Exciting Advances From NVIDIA’s GPU

05/03/2021 | Dan Feinberg, I-Connect007
NVIDIA’s Graphics Processing Technology Conference was, as expected, a showcase of new developments, as well as an opportunity for engineers and developers to learn, enhance skills, and discuss new ideas. Just hearing about all the amazing new developments and the accelerating expansion of AI in virtually all aspects of modern society gives those who attended a better idea of just how much AI is and will continue to change their work and our world.

CES Press Kickoff Presentation

01/07/2020 | Nolan Johnson, I-Connect007
On January 5, Editor Nolan Johnson attended the CES press kickoff presentation “2020 Trends to Watch,” which was hosted by CES Vice President of Research Steve Koenig and CES Director of Research Lesley Rohrbaugh. Koenig and Rohrbaugh set the stage for the week with their presentation, answering the question, “What’s happening in the industry?”

NASA Sounding Rocket Technology Could Enable Simultaneous, Multi-Point Measurements — First-Ever Capability

10/21/2019 | NASA
NASA engineers plan to test a new avionics technology — distributed payload communications — that would give scientists a never-before-offered capability in sounding rocket-based research.



Copyright © 2021 I-Connect007. All rights reserved.