Global Fab Equipment Spending Expected to Reach Record $109 Billion in 2022
June 13, 2022 | SEMIEstimated reading time: 1 minute
Global fab equipment spending for front-end facilities is expected to increase 20% year-over-year (YOY) to an all-time high of US$109 billion in 2022, marking a third consecutive year of growth following a 42% surge in 2021, SEMI announced in its latest quarterly World Fab Forecast report. Fab equipment investment in 2023 is expected to remain strong.
“The global semiconductor equipment industry remains on track to cross the $100 billion threshold for the first time as shown in our latest update of the World Fab Forecast,” said Ajit Manocha, president and CEO of SEMI. “This historic milestone puts an exclamation point on the current run of unprecedented industry growth.”
Fab Equipment Spending by Region
Taiwan is expected to lead fab equipment spending in 2022, increasing investments 52% YoY to US$34 billion, followed by Korea at US$25.5 billion, a 7% rise, and China at US$17 billion, a 14% drop from its peak last year. Europe/Mideast is forecast to log record high spending of US$9.3 billion this year and, while comparatively smaller than outlays in other regions, its investments would represent a staggering growth of 176% YoY. Taiwan, Korea and Southeast Asia are also expected to register record-high investments in 2023.
In the Americas, the report shows fab equipment spending reaching US$9.3 billion in 2023, a 13% YoY rise following a 19% YoY increase in 2022, with the region retaining its fourth-place ranking both years in worldwide fab equipment spending.
Semiconductor Industry Continues to Boost Capacity
The SEMI World Fab Forecast report shows the global industry increasing capacity 8% this year after a 7% rise in 2021. Capacity growth is expected to continue in 2023, rising 6%. The fab equipment industry last saw a YoY growth rate of 8% in 2010, when it topped 16 million wafers per month (200mm equivalents) – nearly half of the 29 million wafers per month (200mm equivalents) projected for 2023.
Over 85% of equipment spending in 2022 will stem from capacity increases at 158 fabs and production lines, a proportion expected to edge down to 83% next year as 129 known fabs and lines add capacity.
As expected, the foundry sector, with a share of about 53%, will account for the bulk of equipment spending in 2022 and 2023, followed by memory at 33% in 2022 and 34% in 2023. The two sectors also account for the largest capacity increases
Suggested Items
The New Chapter: Attracting ‘Generation Green’
03/28/2024 | Hannah Grace & Paige Fiet -- Column: The New ChapterIn the electronics industry, we talk a lot about sustainability in terms of recruitment and retention of the next generation of engineers. But what if the key to sustaining the industry long into the future is through the more common definition of the word? What if, for just a moment, we think about sustainability in terms of the environment and what we as an industry are doing to care for it? Because, if you weren’t aware, Gen Z cares tremendously about the environment and the actions companies are taking to preserve it. Without Gen Z joining the electronics industry’s workforce, we won’t be able to sustain the industry for much longer.
Accenture Invests in Sanctuary AI to Bring AI-Powered, Humanoid Robotics to Work Alongside Humans
03/27/2024 | BUSINESS WIREAccenture has made a strategic investment, through Accenture Ventures, in Sanctuary AI, a developer of humanoid general-purpose robots that are powered by AI and can perform a wide variety of work tasks quickly, safely and effectively.
Don Dennison Appointed to Roll Out KIC’s Latest Thermal Analysis System Software in the Northeast
03/26/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, is pleased to announce the appointment of PIT Equipment Services, LLC, led by Don Dennison, as its representative for New York, New Jersey, and Eastern Pennsylvania.
iNEMI/IPC White Paper on Complex Integrated Systems Highlights Future Technology and Manufacturing Ecosystem Needs
03/25/2024 | IPCToday’s system solutions combine more varied functionality, such as digital, analog, optical, micro-mechanical, etc., packed into smaller form factors. As a result, electronics manufacturing has to deliver increasingly complex integration of diverse technologies with system designs that blur the distinction between chip, package, board, and assembly.
Seeking Employment: Meet Gary Turner
03/25/2024 | Barry Matties, I-Connect007Meet Gary Turner, a recent graduate from the University of Texas at Dallas with a bachelor’s degree in mechanical engineering and a master’s in material science and engineering. He is currently seeking employment in the industry. The following interview will allow you to learn about Gary and see if he might be a good candidate for a position you are looking to fill.