Addressing Quality and Manufacturability Challenges of Mission-Critical Products
August 21, 2015 | Amy Yin Chen, NaprotekEstimated reading time: 2 minutes
Typically, mission-critical military and aerospace printed circuit board assemblies (PCBAs) are based on 100% surface mount technology (SMT) and optimized for manufacturability from day one of design. The reality is that many of these products utilize mixed technology, either due to legacy designs or concerns about the interconnection strength of SMT connectors or other critical parts which may be subject to significant shock or vibration. Use of different soldering formulations can drive challenges in meeting cleanliness standards. In many cases, these mixed technology designs often violate industry-standard design guidelines, creating manufacturability issues.
From a contract manufacturing perspective, the first option is to make design for manufacturability (DfM) recommendations for changes to the design that would correct issues that are likely to drive production defects. This is not always a viable option, especially with legacy products or products that have gone through an extensive qualification process. Consequently, the best OEM-contract manufacturing relationships in this area focus not only on eliminating issues that drive defects before they happen, but also have the flexibility to deliver superior quality even when redesign isn’t possible. To better outline issues that should be closely watched in the design process, here are seven of the most common and potential options for addressing them:
Mismatched Footprints: PCB design library footprints don’t always match the specified component footprints, which can impact solderability on components with improperly sized pads. It can also contribute to additional defects when spacing among SMT and through-hole components is tight. Footprint accuracy should always be checked as part of the design review process.
If the design isn’t changed prior to prototyping, the appropriate approach is to manually place the parts and provide feedback to the customer on the issues. When the component is an integrated circuit, it is bonded pin 1 to pin 1. The preferred option is that the PCB be re-laid out or the bill of materials modified.
Failure to Provide Proper Spacing/Clearance for Through-Hole Components: Mixed technology, double-sided boards are often run on pallets through the wave solder in order to protect any bottom-side components that can’t be exposed to the wave. This issue can also make it difficult to use automated insertion equipment. Use of IPC design guidelines can help the design team to avoid this issue.
The recommended clearance for fixturing is 75 mils. However, as products shrink, many PCB designers are going to 35 mils.
Editor's Note: This article originally appeared in the August 2015 issue of SMT Magazine.
Suggested Items
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.