Article Highlights
Joe D’Ambrisi Discusses MacDermid Alpha Acquisition of HK Wentworth
05/17/2021 | I-Connect007 Editorial Team
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/14/2021 | Nolan Johnson, I-Connect007
Catching Up With Gardien’s Niraj Patel
05/11/2021 | Dan Beaulieu, D.B. Management Group
Arlon President Discusses Acquisition by EMC
05/07/2021 | Nolan Johnson, I-Connect007
Show & Tell Magazine Now Available on Demand
05/04/2021 | I-Connect007 Editorial Team

Latest Articles

Joe D’Ambrisi Discusses MacDermid Alpha Acquisition of HK Wentworth

Element Solutions’ Executive Vice President Joe D’Ambrisi speaks with Nolan Johnson about MacDermid Alpha's recent acquisition of HK Wentworth. Joe shares some details on the transaction and outlines the expected benefits that come from bringing these two companies together.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

There is, increasingly, a sense of returning to “normal” daily life where I live. Of the state’s population, 35% have been immunized against coronavirus as of this week. Lockdowns are lifted, schools have partially reopened, and even some offices are staffing back up.

Catching Up With Gardien’s Niraj Patel

I have always been fascinated by this company, especially two particular services they offer. First, they embed their team into a facility and actually take over as the PCB company’s expert test center; second, they have a universal quality system to track problems and solutions from all over the world and then keep them in a universal database that can be shared by everyone. These are two services everyone in our business needs to know about, which is why I recently reached out to Niraj Patel, Gardien’s vice president in charge of North America.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

Finally, it’s May. The snow has melted, the flowers are beginning to bloom, and summer is just around the corner. We’re slowly getting back to normal after the craziest year I can remember. And our industry is on the move! This week, we bring you a veritable seafood platter of articles and columns about PCB design, fabrication, and assembly.

Arlon President Discusses Acquisition by EMC

Arlon President Brad Foster updates Nolan Johnson on EMC’s acquisition of Arlon in December 2020. Foster shares the basic structure of the agreement, the long-term stability built into the merger, and outlines how this brings EMC, Arlon and Technica together as a team. Foster also hints at what we can expect to see from Arlon and EMC in the coming months.

An Inside Look at the IPC Committee Process

As IPC committee meetings were in full effect at this year’s APEX EXPO, Nolan Johnson and Barry Matties have a discussion with many of IPC’s directors and program managers—Teresa Rowe, Chris Jorgensen, Deb Obitz, John Perry, Andres Ojalill, and Patrick Crawford—to gain a better understanding of how committees work.

Show & Tell Magazine Now Available on Demand

IPC APEX EXPO 2021 is in the history books now. But as the paperboys used to say in the 1930s, you can still “read all about it” in Real Time With… IPC APEX EXPO 2021 Show & Tell Magazine! It’s all right here in one convenient publication: interviews with award winners, coverage of keynote speeches, show notes from our technical staff, thoughts from IPC Emerging Engineers, and much more

Exciting Advances From NVIDIA’s GPU

NVIDIA’s Graphics Processing Technology Conference was, as expected, a showcase of new developments, as well as an opportunity for engineers and developers to learn, enhance skills, and discuss new ideas. Just hearing about all the amazing new developments and the accelerating expansion of AI in virtually all aspects of modern society gives those who attended a better idea of just how much AI is and will continue to change their work and our world.

DFM 101: PCB Materials

One of the biggest challenges facing PCB designers is understanding the cost drivers in the PCB manufacturing process. This article is the first in a series that will discuss these cost drivers (from the PCB manufacturer’s perspective) and the design decisions that will impact product reliability.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

This week’s biggest news came in the form of industry briefings—there were a lot of them and the news was universally positive. The news you need to read for this week includes three reports from IPC detailing: the strength and risks in the global economic recovery; a strong EMS book-to-bill ratio; and strong North American PCB sales. Zeroing in on a single company, Apple reported a significant jump in revenue.


Why We Simulate

When Bill Hargin was cutting his teeth in high-speed PCB design some 25 years ago, speeds were slow, layer counts were low, dielectric constants and loss tangents were high, design margins were wide, copper roughness didn’t matter, and glass-weave styles didn’t matter. Dielectrics were called “FR-4” and their properties didn’t matter much. A fast PCI bus operated at just 66 MHz. Times have certainly changed.

Benchmarking Your Process Engineering

Mark Thompson has been in bare board fabrication for over 30 years. He is now laying out printed circuit boards at Monsoon Solutions, a high-tech design bureau near Seattle, Washington. With Mark’s extensive hands-on knowledge of PCB manufacturing, he brings a unique perspective to PCB design. In this discussion with the I-Connect007 editorial team, Mark shares what’s important from a process engineer’s point of view, and how to stay on top of evaluating and benchmarking your manufacturing process, along with insights from his new role as a designer.

EIPC Technical Snapshot: Supply Chain and Material Price Pressures

EIPC’s seventh Technical Snapshot webinar on April 14 was timely and appropriate. In the context of current supply chain issues and material price pressures facing the PCB industry, particularly in Europe, the EIPC team brought together an outstanding group of experts—each a leading authority in his field—to analyse and comment upon the areas of concern and to respond to questions raised by a capacity audience. As Alun Morgan said, “If you don’t use the European supply chain, you won’t have it anymore!”

Isola Releases IS550H Material

Nolan Johnson speaks with Michael Gay of Isola and Chris Hunrath of Insulectro about the release of their new halogen-free, high-thermal reliability material, which they hope fills the gap in the market between epoxies and polyimides.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

This week, we bring you a wide swath of news, columns, and articles from the past week. Altium announced a new cloud platform that connects design stakeholders with users of its Altium 365 environment. Cadence Design Systems has acquired a company that develops computational fluid dynamics technology to help expand its system analysis offerings.

I-Connect007 'Just Ask' Q&A Compilation Available Now

Throughout 2020, we asked you to send us your questions for Happy Holden, John Mitchell, Joe Fjelstad, Tara Dunn, and Heidi Barnes. You all had plenty of questions for these industry experts. The following is a handy compilation of your questions and their answers.

Driving Down Cost with Process Engineering

Nolan Johnson, Barry Matties, and Happy Holden speak with Matt Mack, process engineer at ICM Controls. Matt shares a day in the life of a process engineer, along with how he approaches continuous improvement and planning for the future on the floor.

Time, Space, Structure, and Model Analysis of CCL Price Increase

According to the CCL Association, copper foil accounts for the largest proportion of raw materials (traditional CCL uses epoxy resin, glass fiber cloth and copper as raw materials). Copper foil in thin plate accounts for about 30% of the overall cost; in thick plate copper accounts for 50%. In CCL production, using Shengyi Technology and Chaohua Technology as examples, the cost of raw materials accounts for about 88% of the total cost, with labor accounting for about 4%. Other costs such as equipment depreciation account for about 8%.

A New Captive PCB Facility in the U.S.

Diane Maceri and Jessi Hall discuss how Schweitzer Engineering Laboratories (SEL) has been working with Alex Stepinski of GreenSource Fabrication to build their own captive PCB facility in Moscow, Idaho; the thought process behind that decision; and their involvement in the Managers Forum at IPC APEX EXPO 2021.

IBM Awarded Best Technical Paper at IPC APEX EXPO 2021

Nolan Johnson and Happy Holden speak with Sarah Czaplewski, whose team at IBM won the Best Technical Paper award at this year’s IPC APEX for “Signal Integrity, Reliability, and Cost Evaluation of PCB Interlayer Crosstalk Reduction.”


PCB Technologies Expands Capabilities

Nolan Johnson speaks with Arik Einhorn and Yaad Eliya of Israel-based PCB Technologies about how they’ve increased their capabilities down to 1 mil line and space to better support their customers from the military, aerospace, and medical markets.

A Show Full of Opportunities

Looking back to my notes from IPC APEX 2020, I noticed one of my comments: There were so many interesting sessions that I often found myself in the position of choosing between several that I wanted to attend in the same timeslot. This year was not any different in that regard. I am purposely glossing over the fact that I, like many of my friends, missed the camaraderie and opportunity to catch up in person while attending these technical sessions, and I look forward to being able to do that next year.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

I’m sure it’s just me being hyperaware, but I can’t shake it: Mars is where it’s at right now. Is it just me, or do you get the same feeling from the news? There are the Mars rovers—three generations of them still rolling, now—and a drone helicopter winding up for a maiden flight any day now. But that’s not all. There’s SpaceX’s StarShip, rapid-prototyping its way into a manned flight to Mars. And NASA’s whole “return to the Moon” project is simply a shakedown for the U.S. government contractors’ Mars flight hardware, too.

Top Five Takeaways from IPC APEX EXPO 2021

IPC APEX EXPO 2021, which went all virtual this year, exemplified how the electronics industry has responded to the COVID-19 global pandemic: with resiliency, agility, and an unwavering commitment to build electronics better. APEX EXPO featured great content and robust discussions on topics of critical importance to the global electronics industry. From my vantage point leading IPC’s government relations programs, here are my top five takeaways from this year’s event.

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 2

A limitation of many 3D optical inspection systems is the cycle time typically associated with processing millions of pixels to reconstruct a full 3D image using data captured from multiple channels. There should not be a compromise between 3D inspection and throughput. A successful inspection deployment should provide oversight for the process, not compromise, interrupt or slow that process.

Highlights on a Rousing Virtual IPC APEX EXPO 2021

What a week that was! I didn’t get to endure the 11-hour flight each way, neither did I need my comfy old shoes, but it certainly was a marathon event. And real-time-plus-six-hours gave me a few late nights, but it was such a meaningful experience, and well worth the effort!

The Future Is Electric

Worldwide research and development of the automotive industry began as early as the 17th century and since then has taken several different design paths, with each country forging its own innovative trail and hundreds of prototypes emerging into the market. Vehicles—with steam-powered, electric, and combustion engines—began to play a major role, not only in the Industrial Revolution, but in everyday life. Although many believe that electric vehicles (EVs) are relatively new to the market, they have actually been around since 1832.

My Thoughts From the Virtual Show

Gosh, I sure missed the live event! I listened in on several technical sessions, the awards ceremony, the keynotes, and the Hall of Fame management session. I tried a couple of professional development courses but got the frownie face on my screen and didn’t go back in. I have almost 90 days(!) to browse them to my heart’s content, so what the heck. There were good points and a few not so good things about this first ever virtual conference. You probably experienced some yourself.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

In this week’s roundup, we have news about a new DFM environment from Siemens EDA, a 2D field solver from Avishtech, and a milestone for the IPC-CFX-2591 QPL. We also have a great article by Calumet’s Audra Thurston, who points out the many advantages of a virtual trade show. And in his latest column, Denny Fritz explains why the DoD is now thinking like many U.S. OEMs—worrying about single-source components, for instance—but the stakes are much higher.

Polar Instruments Driven by Customer Demand

Andy Shaughnessy recently spoke with Geoffrey Hazelett, vice president of sales for Polar Instruments, about the virtual IPC APEX EXPO and the eventual return of live trade shows and conferences. They also discussed some of the company’s newest releases, many of which came about through customer demand.


Technical Conference—Balancing Conventional and Disruptive Technologies

I thought the three keynotes given by IPC President and CEO John Mitchell, Industry Week Editor-in-Chief Travis Hessman, and IPC Chief Economist Shawn DuBravac, were spot on. They all spoke to the fact that the way products are conceived, designed, manufactured, and used is changing rapidly. While the keynotes had different focus areas, I noted an important similarity—they all underscored the need for increased industry collaboration to help bring the factory and supply chain of the future to life.

Book Review: Important Advice on a Well-Balanced Life

Dr. Andrew Temte writes, “Discussing a philosophy for balanced work is really discussing a philosophy for a balanced life.” For me, this is really the true value of his new book, Balancing Act: Teach Coach Mentor Inspire. I love any book that talks about a holistic view to work as included in the entire balanced view of life.

Rising Star Award Winner: Radu Diaconescu

Last year’s IPC APEX EXPO, which took place in sunny San Diego, seems to have taken place in a different world. This was a world where talks were held in front of a large crowd, not a monitor, and travelling to the other side of the world wasn’t considered a reckless risk. By February 2020, however, we were starting to grasp the seriousness of the situation. Back then, there were a lot of things that we didn’t know, and more importantly, there were a lot of things that we had no clue that we didn’t know. The concept of “knowing what you don’t know” or figuring out the areas where one lacks knowledge is probably as important as acquiring the knowledge itself.

Emerging Engineers: Audra Thurston

To be honest: I was skeptical when I first heard IPC APEX EXPO 2021 was going to be virtual. We have all attended too many Zoom meetings that are not engaging, and it is easy for virtual events to fall into this stereotype. However, after attending this one I am a full supporter of the virtual format and hope the IPC considers a hybrid format for future conferences!

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

The Top 5 is labeled as “editor’s choice,” which is a good thing this week because if I were limited to just posting the five most viewed news items, this week’s list would be full of our own coverage for IPC APEX EXPO. Judging from the metrics, that content has been extremely popular.

Rooting Out an 'Us vs. Them' Mentality: An Interview with Laura Kriska

Earlier this year, I-Connect007 columnist Dan Beaulieu submitted a book review on "The Business of WE: The Proven Three-Step Process for Closing the Gap Between Us and Them in Your Workplace." As a follow up to that review, Dan has interviewed the book's author, Laura Kriska.

IPC Supporting Newcomers in the Industry: Notes from IPC APEX EXPO 2021

With the wrap-up of IPC APEX EXPO 2021, it was extremely gratifying to note the emphasis placed on getting young people involved to combat the “graying out” knowledge losses facing our industry. A part of that emphasis was reflected in the award ceremony on Tuesday, March 9, which featured some people you may have seen mentioned in my “Better to Light a Candle” columns.

Emerging Engineer: Jesse Vaughan

Jesse Vaughan, a member of the IPC Emerging Engineer program, discusses some of the takeaways from this year's virtual IPC APEX EXPO.

PCB Sourcing Using PCQR2

In a global market, it is often difficult to determine the best PCB suppliers for your technology needs, while also achieving the lowest costs for your products. Considering each PCB supplier has their own niche in terms of equipment, process, and performance, uniform test data from the IPC-9151D Process Capability, Quality, and Relative Reliability (PCQR2) Benchmark Test Standard can help find the right source for the board based on its specific technology requirements.

After Decades of E-Textiles Work, a Rising Star Award

After decades of work in my field, I was awarded the Rising Star award during IPC APEX EXPO 2021. I would like to thank my research team, all the colleagues from the D-75A-EU E-Textiles Wearables Standard Task Group in Europe, Chris Jorgensen from IPC, and Sigrid Rotzler, the Task Group vice-chair. Last but not least, I would like to express my thanks to IPC CEO John Mitchell for this award.


Bringing New Talent To Our Industry

Joe O’Neil, chairman of the IPC Education Foundation, talks about the panel discussion with young engineers and how the education foundation is working to attract new students into our industry. This effort provides resources to educators and helps young engineers advance their careers.

Happy’s Play-by-Play of IPC APEX EXPO

This was the first time IPC had a virtual APEX EXPO. It went well, but I missed seeing everyone. On the other hand, all this material being available for 90 days certainly allows it to fit anyone’s schedule. I spent all week intently listening to the presentations.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

This week, we have a round-up of stories from around the industry, including a Real Time with… IPC APEX EXPO interview with Ventec, an article by Tamara Jovanovic about eliminating “garbage in, garbage out,” a review of an EIPC webinar by Pete Starkey, and news about another trade show going virtual this summer. And last but certainly not least, we bring you our one-minute video salute to all the fantastic people in this industry who we’ve worked with for decades. Enjoy!

EIPC Technical Snapshot: 5G and Loss Minimisation

Bringing a specialised technical area into sharp focus, this month’s topic was “5G and the understanding of loss minimisation at the PCB level,” with papers on dielectric material, copper foil, and modelling solutions. The webinar was moderated by EIPC board member Paul Waldner managing director of Multiline International Europa, who admitted that he had managed to get a haircut especially for the occasion!

Averatek Offers Updates on ASAP Progress and Online Resource Site

Averatek’s Mike Vinson and Tara Dunn provide an update on Averatek’s ASAP progress. Mike shares the results from his presentation on reliability and signal integrity, while Tara details the newly announced ASAP Community of Interest web resource site.

ASC Focused on Increasing Product Densification

Anaya Vardya discusses the new and upcoming processes and technologies that ASC is developing to increase product densification, as well as how they are connecting with their customer base through webinars and publishing eBooks.

Achieving Growth in a Difficult Year: The Benefits of Global Supply Chain Management

Jack Pattie, president of Ventec USA, discusses the growth of the business, the strengthening of the operation, quality system accreditations, the advantages of building close working relationships with OEMs, and how a well-managed global supply chain has overcome some of the challenges and frustrations encountered during the past year.

With Pluritec, it’s All About Automation

Lino Sousa, vice president of sales with Pluritec, reviews the company’s specialist equipment ranges and discusses the benefits of automation of drilling, solder mask application and wet processing in small-batch, quick-turnaround PCB production.

PCB Requirements for E-Mobility

Nolan Johnson, Barry Matties, and Happy Holden speak with Christian Klein, section manager for PCBs in the automotive electronics division, about Bosch’s recent presentation on PCB requirements of the future in regard to automotive and electro mobility trends and challenges.

I-Connect007 Video: A Salute to The Industry

I-Connect007 has produced this new one-minute video to acknowledge nearly 35 years of sharing your stories. In 1987 we launched our first industry publication and we have been dedicated to covering this industry ever since. We did not start out as publishers: in fact, our background was in printed circuit board fabrication. In 1987 there were still nearly 3,000 PCB shops in North America. At the time, profits were goods, trade events included giant industry parties (remember the extravagant hospitality suites in Anaheim?), and the industry was in a state of change.


What's Hot in the PCB Equipment Market?

Mike Brask, president and CEO of IPS, shares the technology customers in the PCB sector are most interested in and discusses increasing market demands.

The Test Connection Focusing on Services

Bert Horner, president of The Test Connection, explains why he highlighted the company's test services during IPC APEX EXPO. He also discusses some of the lessons the company learned during the pandemic.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

Last week was “APEX Week” and, unsurprisingly, the most popular news this week was APEX related (with one outlier, of course!) This week, the top five items you should follow lean strongly toward APEX interviews focusing on future trends. Remember, this year APEX offers on-demand access to the papers, presentations, events, keynotes, and forums. You can even register for post-show access.

EV Industry Facing Bottleneck Challenges

Nolan Johnson talks with Eduardo Benmayor, general manager at Aismalibar, about materials challenges facing the powertrain portion of the automotive EV industry. Eduardo also speaks about what he sees as the biggest challenge facing EVs—infrastructure.

Eagle Electronics Sees Increase in HDI Work

Prince Kalaria talks about recent supply chain and industry trends he's seen at the Chicago-based electronics manufacturer, most notably the expanded growth around HDI, specialty materials, and onshoring.

The Real Benefits of Inkjet Solder Mask

Shaun Tibbals, sales and marketing director at Electra Polymers, describes the technical, environmental and economic benefits of fully additive solder mask application by inkjet printing, now becoming accepted as the industry-standard technology for the future.

Present and Future Industry Trends With Denkai America

Editor Dan Feinberg recently spoke with Chris Stevens, global sales manager for Denkai America, the only electrodeposited copper foil manufacturer in North America. During this conversation, Chris provides his view of present and emerging trends, the need for higher speed digital designs, and overall business conditions over the past year.

Taiyo Does It Right

In this video interview, Editor Dan Feinberg and Taiyo America's Zach Maekawa discuss the ways that Taiyo adds value to the supply chain while driving innovation in solder mask technology. As Zach explains, Taiyo works with customers and OEMs, measuring all of the “nitty gritty stuff.”

Post-Show Interview with IPC President John Mitchell

In this relaxed wrap-up interview, John Mitchell shares his thoughts on this year’s virtual show with Barry Matties. Some of the emerging themes that came up include smart factory implementation and the increased traction for the emerging engineer program.

The Ongoing Need for Tribal Knowledge

IPC Hall of Fame recipients Bob Neves and Don Dupriest led a special event on the first day of IPC APEX EXPO 2021 called “Forgotten Tribal Knowledge with IPC Hall of Fame and Emerging Engineers.” In this interview, Bob discusses the ongoing need to harness tribal knowledge for the benefit of emerging engineers.


APEX Thursday Keynote: Shawn DuBravac on a Data-driven Tech World

Shawn DuBravac, IPC chief economist, provided Thursday’s IPC APEX EXPO keynote address, “The Tech Industry in a Post-pandemic World.”

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

There was a lot going on in the industry this week, and most of it happened at the virtual IPC APEX EXPO. Sure, it wasn’t the same as being in San Diego, but the show went pretty well, especially for a first-time event. There were a few technical snafus, but the IPC technical staff was responsive and took care of most of the issues right away. As I said a few months ago, how would you like to be in trade show management during a pandemic? So, without further ado, here are my top five stories from the past week.

Heraeus Introduces New High-Reliability Solder Paste

Manu Vaidya discusses the SMT650 high-reliability solder paste Heraeus Electronics is showcasing at APEX 2021 in order to satisfy rising automotive demands.

Elmatica Offers Unique Thank You for Dieter Bergman IPC Fellowship Award

This is how Norwegian PCB broker Elmatica said “thank you” to IPC for selecting Jan Pedersen for the Dieter Bergman IPC Fellowship Award. And you think you've had a cold winter! The Elmatica team definitely has a great sense of humor. Let's all congratulate Jan for his work with IPC, including updating PCB standards and helping to streamline the design data process.

Karen McConnell: Recipient of the IPC Raymond E. Pritchard Hall of Fame Award

"I heard about IPC when I started a new job at UNISYS after graduating college. I moved from ASIC design to printed circuit boards," said Karen McConnell after being inducted into the Raymond E. Pritchard Hall of Fame. "At the time, in the late ’80s and early ’90s, there were rumors going around that printed circuit boards were going to disappear, and ASICs were going to take over the world. But something in printed circuit boards fascinated me. I minored in robotics in college as an electrical engineer and the data used to fabricate, assemble and test the boards is actually all robotic language. I was hooked."

Distributor Just One of Many Roles for all4-PCB

Torsten Reckert, president of all4-PCB, discusses his company's role as a distributor, and the technologies available under their representation. Reckert points to via fill as a key technology, as well as lamination, flash-cutting automation, plasma processing, cross-section equipment, wet processing, among others. The company also manufactures solder resist capital equipment and special machine parts, and is a leader in process optimization.

Vertical Integration on the Rise

Alex Stepinski, founder and vice president of GreenSource, shares his thoughts after his presentation in the managers' forum at IPC APEX EXPO. Alex’s presentation focused on the vertical integration trend and zero waste. Alex has been a pioneer in zero waste since he opened Whelen Engineering Company's captive PCB fabrication shop in New Hampshire, a state that has strict regulations about manufacturing waste. Alex spun off GreenSource as a commercial venture two years ago, after visiting 50 factories in 19 countries, and flying over 1 million air miles.

IPC APEX EXPO 2021 Keynote: Travis Hessman on ‘The Great Digital Transformation’

Wednesday’s Premier Keynote at IPC APEX EXPO 2021 came from Travis Hessman, editor-in-chief of IndustryWeek, “a website and magazine dedicated to manufacturing leadership, operational excellence and the technologies that make it possible.” An energetic and animated presenter, a powerful storyteller and visibly passionate about digital manufacturing, Hessman made it clear at the outset that his goal was not to hype an already over-hyped industry, nor to focus on the technologies themselves, but to walk-through the process of transformation.

Bonding Hybrid Multilayer Constructions at Rogers Corporation

John Ekis, Rogers Corporation's market segment director for aerospace and defense, discusses the SpeedWave family of low-dielectric constant, ultra-low-loss prepreg materials with excellent filling and bonding characteristics for hybrid multilayer constructions. SpeedWave prepreg is also compatible with FR-4 fabrication processes and lead-free PCB assembly processing. SpeedWave is available in multiple spread and open weave glass style and resin content combinations, and is also compatible with FR-4 fabrication processes and lead-free PCB assembly processing.

Jan Pedersen: Dieter Bergman IPC Fellowship Award Recipient

Patty Goldman speaks with Jan Pedersen of Elmatica, Dieter Bergman IPC Fellowship Award recipient, about his extensive involvement with IPC on many committees developing standards, especially the automotive and medical addendums to IPC-6012 and 6013.


IPC Managers Forum: Packed With Useful Information

Gene Weiner of Weiner International Associates discusses the highlights of the IPC Managers Forum which took place on the first day of IPC APEX EXPO. The forum was filled with a variety of speakers covering a range of industry topics.

IPC Releases Free Smart Factory for Electronics Manufacturing Presentation

The IPC APEX EXPO 2021 Technical Program features a tract on the “Factory of the Future Implementation,” March 10-11. As part of that program, IPC has made available a free presentation and video from the Manufacturing Technology Center (MTC), a CFX Program member. In this presentation, Barry Maybank along with Naim Kapadia, MTC technology manager, explains the background of the MTC, one of seven high-value-manufacturing technology catapult centers established in the UK.

IPC APEX EXPO Keynote: John Mitchell on the State of the Industry

IPC President and CEO Dr. John Mitchell was the Monday keynote for the 2021 edition of IPC APEX EXPO. Delivered via video conference as a part of this year’s virtual format, Mitchell made good use of a panel approach. After opening remarks, Mitchell anchored an around-the-horn series of reports from IPC experts.

Real Time with… IPC APEX EXPO 2021: Developments in Digital Manufacturing

Michael Ford and Pete Starkey discuss the industry trend towards digital manufacturing, the latest in 3D CAD technology, ontological data and the benefits of the new IPC standard for digital twins.

IPC APEX EXPO 2021: The Complete Agenda

IPC APEX EXPO week kicks off today in a first-ever virtual format. The 24-page IPC APEX EXPO program of courses and conference events details the events, technical program, keynotes, and much more.
NEXT
Copyright © 2021 I-Connect007. All rights reserved.