IISc Technology Can Address Automotive Chip Shortage in India
March 14, 2022 | Indian Institute of Science (IISc)Estimated reading time: 3 minutes
The automotive industry worldwide has been facing a serious shortage of chips in recent times, beginning from early 2021. There are several reasons that contribute to this shortage, one of which is the increasing demand for automotive and consumer goods (most of their parts are driven by electronics). Like the rest of the world, Indian automotive manufacturers have also been affected by this shortage significantly.
Researchers at the Indian Institute of Science (IISc) have been collaborating with a semiconductor foundry under the IMPRINT programme of the Government of India, which could provide a solution to address this issue. The IISc team embarked upon developing an indigenous technology platform for manufacturing automotive (analog) chips to be used for commercial and strategic applications.
Automotive chips are different from the conventional processor chips used in devices such as smartphones and laptops. An automotive chip (also referred to as a power ASIC) needs to handle various tasks simultaneously, including instrumentation, sensing and control of various electro-mechanical parts. The electrical interface to these parts operates at higher voltages (5V-80V) compared to a processor chip, which only requires a low voltage switch or transistor (0.9V-1.8V). Developing a technology platform that can offer the wide range of capability required by automotive chips has always been a challenge for the industry and can take 5-6 years, unlike the processor technology platform which typically takes about 1.5-2 years. However, this extra time investment can pay off in terms of a significantly lower obsolescence rate – such chip technologies can last for 15-20 years without having to be replaced.
Automotive chips require high-voltage switches or transistors built onto the chip. These transistors are called Laterally Diffused MOS (LDMOS). Silicon LDMOS devices are a type of field-effect transistors which can operate at much higher voltages than regular transistors. They can also be integrated with billions of other transistors inside a chip. This requirement is also particularly important for space and defense applications.
Keeping these requirements in mind, the IISc team and its foundry partner have been working on developing a range of LDMOS devices (from 10V to 80V) with characteristics matching current industry offerings. The collaborative effort has led to the development of a robust high voltage automotive technology platform.
Technology platforms available in the industry have enabled the capability of developing circuits that can handle voltages ranging from 7V to 80V, significantly increasing the earlier capabilities of domestic partners of 3.3V. Extending this portfolio to 80V by importing technology would have cost tens of millions of USD. This collaborative effort has augmented the baseline process and enabled the development of devices capable of operating at 80V, at a cost of less than 0.5 million USD.
“IISc and its partners worked pretty much like an industrial R&D team and handled the fundamental issues differently, which industry usually handles empirically (by trial-and-error),” explains Prof Mayank Shrivastava (Department of Electronic Systems Engineering) who led the project from IISc. “For example, we could delve deeper into some fundamental issues related to these devices, like Quasi-Saturation behaviour, which hasn’t been completely understood/solved in the past 40+ years. Thanks to the IMPRINT programme for enabling such a development, which is turning out to be a win-win for IISc and its foundry partner.”
Shrivastava adds that the devices developed have been rigorously tested and found to be robust. “These LDMOS devices can now become standard offerings (like any other industry), which will help our foundry partner develop a range of VLSI products in-house. Besides, the technology/knowhow can be transferred to other semiconductor foundries that want to scale up their process from baseline CMOS to an automotive process.”
Suggested Items
The New Industry: Will the Growth Continue?
04/30/2024 | I-Connect007 Editorial TeamHow sustainable are the primary financial models in the United States regarding PCB fabrication shops? In this interview with economic experts Shawn DuBravac and Tom Kastner, we explore what’s happening with U.S. printed circuit board shops in today’s market, how consolidation affects the industry, and what can be done.
TTM’s High Tech Expansion and Industry Innovation
04/30/2024 | Marcy LaRont, PCB007 MagazineTom Edman has been the CEO of TTM Technologies since 2014 and has an extensive background in electronics and manufacturing. TTM is a leading global manufacturer of technology solutions, including mission systems, RF component and RF microwave microelectronics assemblies, and quick turn and advanced technology printed circuit boards.
U.S. Companies Invest Heavily in Robots
04/30/2024 | IFRManufacturing companies in the United States have invested heavily in more automation: total installations of industrial robots rose by 12% and reached 44,303 units in 2023. Number one adopter is the car industry followed by the electrical and electronics sector.
USPAE to Springboard U.S. Technology Forward
04/30/2024 | Marcy LaRont, PCB007 MagazineThe U.S. Partnership for Assured Electronics (USPAE) was launched as a nonprofit subsidiary of IPC in 2020, specifically to manage the DoD relationship and access to funding, and to develop a cooperative facility to develop UHDI capabilities in the U.S., not only for the defense sector, but for the whole of the U.S. electronics industry. It is a tall order, but industry veteran Joe O'Neil believes it will happen. Having been tasked with making the UHDI Capable Cooperative Production Facility (UCCPF) a reality, he provides an update on this important project for U.S. electronics manufacturing.
Samsung Electronics Begins Industry’s First Mass Production of 9th-Gen V-NAND
04/29/2024 | Samsung ElectronicsSamsung Electronics, the world leader in advanced memory technology, today announced that it has begun mass production for its one-terabit (Tb) triple-level cell (TLC) 9th-generation vertical NAND (V-NAND), solidifying its leadership in the NAND flash market.