Murata Introduces Energy-Saving System Using Storage Batteries and AI Control at Head Office
July 18, 2022 | MurataEstimated reading time: 1 minute
Murata Manufacturing Co., Ltd. installed an energy-saving system combining AI energy-saving controls manufactured by Mutron Co., Ltd. and Murata's containerized storage batteries at its headquarters in Nagaokakyo-shi, Kyoto, in July 2022. The System will be installed at all Group sites, including production sites, from 2023 onward to reduce the supply load on the power grid and contribute to the stabilization of power supply.
In recent years, the tight electricity supply and demand has become a major social issue in Japan during the periods of high electricity demand in summer and winter. In order to improve the supply-demand balance, it is important to reduce power consumption and improve the efficiency of energy use at the level of individual companies, which are large consumers of electricity.
The System installed at Murata's headquarters combines Mutron's AI energy-saving controls with containerized storage batteries that use Murata's FORTERION lithium-ion batteries, which have an expected life of at least 15 years and a high level of safety. The newly installed storage batteries and Murata's unique storage battery control technology will enable more flexible energy-saving control, which is expected to improve the CO2 reduction effect. In addition, the installation of large-capacity storage batteries means that they will also play a role in maintaining site functions as an emergency power source in the event that a business continuity plan (BCP) comes into effect. With this System, Murata aims to achieve an energy-saving rate of approximately 20% at its head office in fiscal 2022.
The System, managed by Mutron's energy-saving control technology, will optimize control of in-house air-conditioning and refrigeration equipment, and will also improve energy management efficiency by linking to Murata's storage battery system. After accumulating operational results and enhancing the effectiveness of the System, Murata will move ahead with installation at multiple sites within the group, including production sites, from 2023 onward to reduce the load on the power supply network and contribute to the stabilization of power supply.
The Murata Group will continue to improve the efficiency of energy use at its sites in and outside Japan and carry forward efforts to combat climate change.
Suggested Items
Lockheed Martin Australia, The Department Of Defence Sign Strategic Partnership Head Contract
04/26/2024 | Lockheed MartinLockheed Martin Australia signed a landmark AUD$500 million contract with the Department of Defence to build Australia’s future Joint Air Battle Management System under project - AIR6500 Phase 1 (AIR6500-1).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.