First Solar Selects Louisiana for Fifth American Manufacturing Facility
August 11, 2023 | Business WireEstimated reading time: 3 minutes
First Solar, Inc. announced that it has selected the Acadiana Regional Airport in Iberia Parish, Louisiana as the location for its previously announced fifth fully vertically integrated manufacturing facility in the United States. The facility, believed to be the single largest capital investment in the area’s history, represents an investment of up to $1.1 billion in expanding America’s capacity to produce its own photovoltaic (PV) solar modules. Expected to be completed in the first half of 2026, the facility is forecast to grow the company’s nameplate manufacturing capacity by 3.5 gigawatts (GW) to reach approximately 14 GW in the US in 2026.
First Solar’s investment in Louisiana is expected to create over 700 new direct manufacturing jobs in the state. The company, already believed to be the largest employer in America’s solar manufacturing sector with over 2,500 employees across the country, expects to have over 4,000 direct employees in the country by 2026, including 850 new manufacturing jobs expected to be created in Alabama and Ohio and over 100 new R&D jobs planned in Ohio.
“First Solar’s selection of Iberia Parish for its newest solar panel production facility leaves no doubt that Louisiana is leading the global energy transition, and creating good-paying jobs as a result,” said Louisiana Governor John Bel Edwards said. “This massive investment and the jobs it will create are a huge win for the people of Acadiana and the entire state. It is proof positive that Louisiana’s ‘all-of-the-above’ approach to energy is growing and diversifying our economy. Thank you to everyone who made this day a reality, and a special thank-you to First Solar for trusting Louisiana to be part of their mission to create a more sustainable future.”
First Solar is unique among the world’s ten largest solar manufacturers for being the only US-headquartered company and not manufacturing in China. The company’s tellurium-based semiconductor, which allows it to avoid any dependence on Chinese crystalline silicon supply chains, is the second most common photovoltaic technology available today.
“We are pleased to partner with Louisiana as we lean into our commitment to creating enduring value for America by expanding our solar manufacturing footprint and the domestic value chains that enable it,” said Mark Widmar, chief executive officer, First Solar. “As we evaluated our options, Louisiana’s ability to deliver the talent we need stood out, thanks to its extensive workforce development initiatives and the presence of academic institutions such as the University of Louisiana at Lafayette which now features a world-class solar energy lab.”
Widmar added, “In bringing our unique, fully vertically integrated solar manufacturing model to Louisiana, we expect the plant to mirror the commitment to Responsible Solar evident at every First Solar manufacturing facility, which are among the cleanest, safest, and most diverse in the industry. We are proud that our investment in American manufacturing will create stable, good-paying manufacturing jobs and economic and social value in the state.”
Since the start of this decade, First Solar has embarked on a $4.1 billion manufacturing expansion strategy that has seen it grow from approximately 6 GW of global nameplate capacity in 2020 to 13 GW operational today, with approximately 12 GW of nameplate capacity expected to come online in the US and India between the second half of 2023 and 2026. In addition to the Louisiana facility, First Solar commissioned its third Ohio factory earlier this year and is expected to complete its new facility in Alabama and the expansion of its existing Ohio footprint in 2024. The company also expects its new facility in India to begin commercial production in the second half of this year. Additionally, the company is investing up to $370 million in a dedicated R&D innovation center in Perrysburg, Ohio, which is expected to be completed next year.
The new Louisiana facility will produce First Solar’s Series 7 modules, which are expected to be manufactured with 100% US-made components identified in the current domestic content guidance issued by the US Department of Treasury. First Solar anticipates that once the new factory is completed and ramped, Series 7 modules will account for over two thirds of its annual domestic nameplate capacity. Series 7 modules currently produced at the company’s Ohio facility are already manufactured with US-made glass and steel.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.