Rockley Photonics Collaborates with Cadence on Hyperscale Data Centers


Reading time ( words)

Cadence Design Systems, Inc. has announced that Rockley Photonics, a leading supplier of integrated photonic solutions, has deployed a comprehensive set of Cadence® system analysis and custom tools to design a state-of-the-art, high-performance System-in-Package (SiP) for hyperscale data centers. Using a broad suite of Cadence tools, Rockley Photonics achieved first-pass success, accelerating time to market.

The Rockley Photonics device is a complex system-in-package solution, comprised of discrete chiplets connected through a high-speed 112G PAM4 serial interface. To successfully complete the project, the Rockley Photonics design team needed a powerful, comprehensive combination of Cadence system analysis and custom tools, featuring the Clarity™ 3D Solver, Allegro® technologies and the EMX® 3D Planar Solver; custom technologies including the Virtuoso® RF Solution and Spectre® X Simulator; and the Quantus™ Extraction System for signoff. The Cadence design tools—across chip, package, board and system—offer a tight integration that doesn’t exist with other solutions on the market, providing Rockley with a complete solution for system innovation.

The Rockley engineering team utilized the Clarity 3D Solver to analyze system-level electromagnetics effects, a task they couldn’t achieve with other tools. Using the Clarity 3D Solver from within the Virtuoso RF Solution, Rockley Photonics’ engineers successfully modeled coupling between the chiplets, the board, and the high-speed transmission lines—including wirebonds—all the way to the photonics chiplet, ensuring complete system performance. In addition, the Cadence EMX® 3D Planar Solver provided a truly differentiated electromagnetic flow that enabled Rockley Photonics to demonstrate a 12X performance improvement over legacy design flows.

“At Rockley Photonics, we routinely evaluate our system design methodology so we can find ways to improve and enable our engineering team to perform at their peaks,” said David Nelson, vice president, IC design at Rockley Photonics. “By using the integrated Cadence flow, we were able to capture a deterioration in the 50-60GHz frequency range through its cross-fabric coupling capabilities, whereas our previous flow, which utilized a single-fabric approach, was not able to capture the deterioration. In addition, the Clarity 3D Solver demonstrated impressive scaling up to 128 CPUs, and the entire 100GHz cross-fabric design was extracted in just three hours.”

The Cadence system analysis and custom tools support the company’s broader Intelligent System Design™ strategy, providing customers with an efficient path to achieve system innovation.

About Cadence

Cadence is a pivotal leader in electronic design, building upon more than 30 years of computational software expertise. The company applies its underlying Intelligent System Design strategy to deliver software, hardware and IP that turn design concepts into reality. Cadence customers are the world’s most innovative companies, delivering extraordinary electronic products from chips to boards to systems for the most dynamic market applications, including consumer, hyperscale computing, 5G communications, automotive, mobile, aerospace, industrial and healthcare. For six years in a row, Fortune magazine has named Cadence one of the 100 Best Companies to Work For. Learn more at cadence.com.

Share

Print


Suggested Items

What It Takes to Be a Milaero Supplier, Part 2

03/24/2020 | Anaya Vardya, American Standard Circuits
The decision to pursue military and aerospace (milaero) certification impacts every facet of the organization, and not every shop is prepared to make this transformation. In Part 2, Anaya Vardya focuses on what it takes to be a milaero supplier in the areas of engineering and CAM.

Requirements of Being a MIL-certified Shop

11/12/2019 | Barry Matties, I-Connect007
Barry Matties speaks with American Standard Circuits’ VP of Business Development David Lackey, who has nearly 40 years of experience producing PCBs for the mil/aero market. David talks about what it’s like being a MIL-certified shop and the stringent quality and reporting requirements that it entails.

Small Eye in the Sky: Special Forces Will Soon Have New Enduring ISR Option

04/29/2019 | Lockheed Martin
Combating counterinsurgency, conducting reconnaissance, collecting information vital to national security, United States Special Forces conduct some of the most sensitive and critical missions.



Copyright © 2021 I-Connect007. All rights reserved.