Researchers Develop Large-scale Manufacture of Electronic Paper
July 2, 2021 | Linköping UniversityEstimated reading time: 2 minutes
A team that includes researchers from Linköping University has developed an electronic paper that can be manufactured on an industrial scale. Long-term uses of the paper include the construction of thin batteries and supercapacitors that take only a few seconds to charge.
Increased use of renewable energy from solar and wind power will be necessary to achieve climate objectives. However, the possibility to store energy in an eco-friendly and efficient manner is a challenge that is slowing the conversion to sustainable solutions.
Researchers at Linköping University, together with colleagues from Rise and the Royal Institute of Technology, have developed an electronic paper that can be manufactured on an industrial scale. In the pilot project, rolls of length 10 metres and width 20 centimetres have been successfully manufactured, which means that full-scale production is fully possible. The paper has high conductivity, and long-term uses include energy storage and the construction of electronic components.
“We have been trying to take printed electronics, in which paper is used to support electronic components, to the next development stage, which is to incorporate the components into the paper. Electronic paper. This pilot project shows that it is possible, on a scale that transcends the slow and small-scale experiments in the research lab”, says Isak Engquist, associate professor and head of research in the Laboratory of Organic Electronics (LOE) at Linköping University.
Sustainable
The paper is made from a mixture of cellulose, conducting polymers and charcoal from coconut, which makes the material flexible, durable and electrically conductive. In addition, the production is cheap and environmentally sustainable, which is a great advantage over traditional electronic components. These often contain scarce metals and toxic substances.
Magnus Berggren, professor at LOE, sees many possible applications for the new electronic paper.
“The first commercial products will probably be various forms of small energy-storage systems for future electronic applications. The intention then is to scale the technology up to give large-scale energy storage and fuel cells”, says Magnus Berggren.
From lab to industry
A prototype of electronic paper was developed at LOE in 2015 and consisted of a sheet with diameter 15 centimetres. A circular sheet of electronic paper.
The lab then faced the challenge of being able to produce the electronic paper on an industrial scale, and it has now been successful in this.
“It’s important that industry has participated in our research projects from an early stage, ensuring that we do not develop technology that turns out to be impossible to produce”, says Magnus Berggren.
Two projects are behind the discovery: 0D+1D+2D=3D, led by Linköping University, and the Digital Cellulose Center, DCC, led by Rise. Isak Engquist believes that the new paper offers exciting possibilities for continued development, to achieve even better electronic properties.
“It will be interesting to see the new applications that our creative researchers can come up with when they get their hands on this material. The paper is functional through its complete thickness, which means that it can conduct much more current and store much more energy than thin layers printed onto conventional paper”, says Isak Engquist.
Translated by George Farrants.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).